All our Ultralite flywheel and back plates are C.N.C machined from solid billet.
Flywheel weight 3.76 kg Backplate weight 1.1 kg
Steel 4-bolt main caps reduce crank flex at high rpm, The block is drilled and tapped for 2 extra holes then the mains need to be linebored through to re-size
All prices include V.A.T
Only top quality tested and proven parts are used and sold by MORSPEED, We don't build engines using inferior parts and therefore we don't sell inferior parts.
All Parts can be purchased separately as listed below:
BLOCK ASSEMBLY:
|
Chemical clean (removes paint and clears oilways) |
£25.00 |
|
|
Set of block oilway & core plugs |
£6.00 |
|
|
Steel centre main strap (heavy duty 1") inc bolts & washers |
£20.00 |
|
|
Steel billet 4-bolt cap inc bolts & washers |
£75.00 |
|
|
Steel end caps (price each) |
£75.00 |
|
|
ARP Head stud kit (11-stud) |
£95.00 |
|
|
ARP Rod bolts (A+) |
£75.00 |
|
|
ARP Rod bolts ('S') |
£75.00 |
|
|
Set of competition VP2 cam bearings 998 & 1275 |
£25.00 |
|
|
Set of lead copper STD-040 centre tag main bearings |
£30.00 |
|
|
Set of lead copper STD-040 side tag main bearings |
£30.00 |
|
|
Set of lead copper STD-040 A+ big end bearings |
£26.00 |
|
|
Set of lead copper STD-040 998cc & 'S' big end bearings |
£26.00 |
|
|
Set of lead copper STD-005" Thrust bearings |
£9.00 |
|
|
Set of chilled iron cam followers |
£15.00 |
|
|
Set of Lightened chilled iron cam followers |
£40.00 |
|
|
Steel backed H/C High flow oil pumps 998-1275 |
£25.00 |
|
|
Steel backed H/C Powerflow oil pump Turbo |
£50.00 |
|
|
Budget Duplex timing gears (mild road only) |
£22.00 |
|
|
Steel duplex timing gears (as works 'S' engines) |
£40.00 |
|
|
Steel Ultralite Duplex timing gears |
£60.00 |
|
|
Steel Vernier duplex |
£85.00 |
|
|
Cam belt timing kit vernier type |
£185.00 |
|
|
Duplex chain |
£5.00 |
|
|
Simplex chain |
£4.00 |
|
|
Belt & seal set |
£25.00 |
|
|
|
||
|
GASKETS: |
|
|
|
998-1100cc copper head gasket |
£15.00 |
The best around for the small bore units. |
|
1275-1380cc AF460 11-stud copper head gasket |
£15.00 |
An old skool gasket. |
|
1275-1380cc BK teflon 11-stud performance head gasket |
£15.00 |
STD practice on any high compression unit. |
|
1275-1380cc BK450 teflon 11-stud Turbo head gasket |
£15.00 |
As used by most high output turbo/super charged engines. |
|
1275-1380cc Cometic steel multi-layer head gasket |
£85.00 |
Cometic brings you the very best in head gaskets. |
|
Cometic alloy multi-layer sump gasket kit |
£25.00 |
Includes both sump gaskets, 'O' ring and horse shoe seal. |
|
Cometic alloy multi-layer Turbo/injection manifold gasket |
£20.00 |
New from Cometic, a replacement for the injection steel ring gasket. |
|
Engine conversion gasket set |
£15.00 |
A full kit made for Morspeed. |
|
Gearbox conversion gasket set |
£15.00 |
A full kit made for Morspeed. |
|
|
|
|
|
KENT PERFORMANCE CAMSHAFTS: |
||
|
KENT Sports 266 1000-6500 rpm (998/1275) |
£75.00 |
|
|
KENT Sports'R' 276 1500-7000 rpm (998/1275) |
£75.00 |
|
|
KENT Supersports 286 2000-7500 rpm (998/1275) |
£75.00 |
|
|
KENT Supersports'R' 296 3250-8000 rpm (998/1275) |
£85.00 |
|
|
KENT Race 310 4000-8500 rpm (1275) |
£100.00 |
|
|
KENT STR930 billet 3000-7500 rpm (1275) |
£220.00 |
|
|
|
||
|
MORSPEED SPECIAL PROFILES: |
|
|
|
MSPD Fast road PH2 1200-6000 rpm (998-1275) |
£65.00 |
A camshaft designed for torque over BHP. |
|
MSPD Trackday PH3 1800-7000 rpm (998-1275) |
£65.00 |
Idles at 1000rpm, drivable around town, just fantastic. |
|
*NEW* MSPD street race SL12 *NEW* |
£90.00 |
The ultimate development for serious road or trackdays. |
|
MSPD Rally PH4 3000-8000 rpm (998-1275) |
£90.00 |
Sit back and hold tight for this one! |
|
MSPD 300 Degree SL13 sprint scatter cam |
£90.00 |
Strong power from 3250-8500 rpm, needs 2 x 1.5 S.U's or 45DCOE. |
|
MSPD Full Race Scatter cam 312 Degree |
£90.00 |
|
|
MSPD Ultimate Race Scatter cam 318 Degree |
£90.00 |
|
|
MSPD T2 high boost Turbo cam |
£65.00 |
|
|
Genuine spider drive 649 |
£65.00 |
Original specification |
| Steel billet x-drilled camshafts any profile |
£220.00 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MSPD PROFILE CAM KITS: |
|
|
| MSPD cam, followers and H/C oil pump |
£100.00 |
Includes a cam lock tab, timing cover and oil pump gasket. |
| MSPD cam, followers, H/C oil pump & duplex gears |
£120.00 |
Includes a cam lock tab, timing cover and oil pump gasket. |
| MSPD cam, followers, H/C oil pump & vernier duplex |
£170.00 |
Includes a cam lock tab, timing cover/oil pump gasket & timing disc. |
| MSPD BLANK cam, followers, H/C oil pump. |
|
|
|
|
|
|
|
|
|
|
|
PISTONS: |
|
|
|
998 flat top piston set +020-060-080 |
P.O.A |
|
|
1275 piston set 8.8 cpr 21251 +20-40-60 |
£85.00 |
|
|
1275 piston set 9.75 cpr 21253 +20-40-60 |
£150.00 |
|
|
TURBO 21253 13cc piston set +20-40-60 |
£185.00 |
|
|
TURBO Mega 10cc piston set 15psi +20-40-60 |
£240.00 |
|
|
TURBO Mega with bespoke dish size +20-40-60 |
£280.00 |
|
|
Powermax 10cc dish set 73.5mm |
£160.00 |
|
|
Mega piston set all sizes |
£230.00 |
|
|
0mega cast piston all sizes inc turbo |
£270.00 |
|
|
Omega forged all sizes |
£425.00 |
|
|
Ring packs available for omega from: |
£60.00 |
|
|
|
|
|
|
CRANKSHAFTS: |
|
|
|
Re-grind only |
£50.00 |
|
|
Re-grind & harden |
£80.00 |
|
|
Re-grind- harden, wedge & X/Drilled |
£185.00 |
|
|
Re-grind- harden, wedge, X/Drilled & bladed |
£235.00 |
|
|
Mini7 & mini miglia full spec crankshaft |
£300.00 |
|
|
84.3mm Longstroke - Hardened - wedged & x-drill mains |
£215.00 |
|
|
78.3mm Shortstroke - Hardened - wedged & x-drill mains |
£215.00 |
|
|
|
|
|
|
FLYWHEELS AND CLUTCH UNITS: |
|
|
|
Ultra-lite steel billet flywheel inertia or pre-eng ring gear |
£120.00 |
|
|
Ultra-lite steel billet back plate |
£85.00 |
|
|
Set of new steel drive strap cover bolts x6 |
£17.60 |
|
|
Set of new drive straps x6 |
£20.50 |
|
|
Solid road plate |
£25.00 |
|
|
AP bonded rally plate |
£45.00 |
|
|
Alcon 4 paddle cerametalic plate (race use only) |
£90.00 |
|
|
AP clutch pressure cover - Blue/orange/grey |
£38.00 |
|
|
Verto clutch pressure cover |
£85.00 |
|
|
Verto clutch pressure cover Genuine turbo |
£105.00 |
|
|
H/Duty flywheel fastening bolt & washer |
£25.00 |
|
|
|
|
|
|
CYLINDER HEAD: |
|
|
|
Road quality lead free inlet & exhaust valves tripple collet |
£7.00 |
|
|
Race quality 214-NS Steel valves (all sizes) |
£12.00 |
|
|
Steel guides x8 |
£11.00 |
|
|
Steel TURBO guides x8 |
£20.00 |
|
|
Silicone bronze guides x8 |
£25.00 |
|
|
Silicone bronze TURBO guides x8 |
£40.00 |
|
|
Steel top-caps |
£35.00 |
|
|
Titanium top-caps |
£80.00 |
|
|
Road springs 160lb (double) x8 |
£25.00 |
|
|
Road springs 180lb (double) x8 |
£25.00 |
|
|
ISKIE Race springs 220lb (double) x8 |
£60.00 |
|
|
1.5 Roller tip rockers |
£185.00 |
|
|
1.5 Full roller rockers |
£285.00 |
|
|
|
|
|
|
GEARBOX: |
|
|
|
Double roller |
£25.00 |
|
|
Single roller |
£20.00 |
|
|
Needle bearings (full-set) |
£15.00 |
|
|
High grade centre pick up-pipe |
£26.00 |
|
|
Baulk rings x4 (Genuine) |
£48.00 |
|
|
Baulk rings x4 |
£27.00 |
|
|
Competition Planet gears x2 |
£25.00 |
|
|
Competition diff pin |
£17.00 |
|
|
Fibre washers x2 |
£3.80 |
|
|
Bronze planet washer x2 |
£3.80 |
|
|
S/CUT |
|
|
|
MSPD clubman S/Cut gear kit |
£375.00 |
|
|
MSPD race S/Cut gear kit |
£410.00 |
|
|
MSPD S/Cut drop gears |
£235.00 |
|
|
MSPD S/Cut Roller drop gear set |
£350.00 |
|
|
S/Cut final drive STD or LSD type (from) |
£235.00 |
|
|
Involute dog kit (race use only) |
£1100.00 |
|
|
Quaiffe Face dog kit (road or race use) |
£1250.00 |
|
|
X-Pin diff unit |
£175.00 |
|
|
Quaiffe ATB road-rally unit |
£585.00 |
|
|
Tranex L.S.D rally-race unit |
£480.00 |
|
|
L.S.D Out put shafts (from) |
£75.00 |
|
Welcome to Morspeed performance tuning
Performance parts
