Welcome to Morspeed performance tuning
Machining prices
BLOCK ASSEMBLY
| Bore +020-030-040-060 |
£85.00 |
| Off-set bore 73.5mm |
£95.00 |
| Surface block upto .030" |
£30.00 |
| Surface block upto .150" |
£60.00 |
| 5/16 u.n.f uprated sump fixings |
£35.00 |
| 11-Stud conversion |
£20.00 |
| Stress relive block internal (helps oil return) |
£35.00 |
| Machine cap & Supply steel H/Duty strap inc bolts |
£30.00 |
| Supply & fit new cam bearings |
£35.00 |
| Machine valve pockets to block 998cc |
£80.00 |
| Drill & tap 4 - bolt fixing (cap not included) |
£25.00 |
| Line bore mains |
£120.00 |
| Chemical clean block inc new oilway & core plugs |
£25.00 |
| Thread repair (each) |
£10.00 |
High tempreture chemical steam bath Ensures all components are spotless
CON-RODS
| Lighten set of 4 conrods approx 35g each rod |
£70.00 |
| Lighten & stress relive set of 4 rods inc shotpeen approx 80g each rod. |
£180.00 |
| Re-size big ends x4 rods |
£80.00 |
| Ream little ends for floating pins (not bushed) |
£35.00 |
|
Bush little ends for 18mm floating pins |
£50.00 |
|
Balance 4 x Con-rods (set) |
£35.00 |
CRANKSHAFT
| Standard Re-grind only (7 journals) |
£55.00 |
| Re-grind to stroke (7 journals) long or short - 79.3* 82.3* 83.5* 84.3mm |
£150.00 |
| Plasma nitrided & case hardened to 5 micron |
£35.00 |
| Wedge for improved counter balance (removes 3kg) |
£60.00 |
| Blade for improved oil drag (removes 1kg) |
£60.00 |
| Backdrill through big ends |
£60.00 |
|
X-Drill mains only |
£30.00 |
| X-Drill mains & big ends |
£60.00 |
|
Balance crankshaft |
£35.00 |
|
|
|
|
GEARBOX |
|
|
Machine case to accept tranex-salsbury LSD |
£50.00 |
|
Stress relive case (helps oil return) |
£35.00 |
|
Supply & fit baffle try (eliminates oil splash) |
£75.00 |
|
Open sump holes to accept 5/16 bolts |
£5.00 |
|
Repair thread (each) |
£10.00 |
|
Convert or replace sump thread with steel insert |
£25.00 |
All Cylinder head modification is carried out on-site in our purpose built grinding room.
